Industriestrasse 27
CH-8335 Hittnau

tel +41 (0)44 953 1010
fax +41 (0)44 953 1019




CANopen I/O

Your choice for easy link of I/O to CAN networks.


The BRUNNER CANopen I/O is part of the our CANopen product portfolio and is providing the link for digital and analogue I/O signals of switches, sensors, actuators etc. to a CAN network at a competitive price point.

Its robust industrial design and snap-on mounting capability allow the fast and easy mounting and connection of the device directly at the signal source. Transmitting digitalized I/O data over standard CAN Bus networks reduces complexity and costs for the installation of control and signal wiring. The high-speed CAN Interface supports CAN 2.0A&B communication standard DS401.

The four digital outputs of the BRUNNER CANopen I/O can drive high loads up to 2.6A for 1 Output and up to 5.3A for all 4 Outputs. All Outputs are short circuit and over temperature protected. Operating the Digital Inputs in incremental encoder mode turns the Device in a 16Bit up-down counter for various applications.

Setup and Configuration is easily handled via the BRUNNER CANopen Commander software.


Input Voltage12-30 VDC (WAGO 733-103)
Communication2x CAN 2.0A/B, ISO 11898 (RJ45)
Interface8x Digital Inputs: 24V, optional 5V,
(WAGO 733-110)
4x Digital Outputs, 24 V, 2.6 A@1 Ch,
5.3 A@4 CH (WAGO 733-106)
8x Analogue Inputs, 0-10 V, 10 Bit
(WAGO 733-110)
MountingTop hat DIN snap-on mounting
35 mm x 15 mm (EN 50022),
35 mm x 7.5 mm (EN 50022) and
15 mm x 5 mm (EN 50045)
Size118 x 76 x 43 mm
4.65 x 3 x 1.7 in
Weight130 g / 0.29 lb


  • 8 Digital Inputs (configurable for an incremental encoder mode with a 16bit counter)
  • 4 Digital Outputs +12V/24V, up to 2.6A, short circuit and over temperature protected
  • 8 Analogue Inputs +10V, 10bit
  • CAN 2.0A/B, ISO 11898
  • CiA DS301: Application Layer and Communication Profile
  • CiA DSP305: Layer setting services (LSS) and protocols
  • CiA DS401: Device Profile for Generic I/O Modules
  • CANopen Commander software tool for configuration
  • Low power consumption
  • Software update CAN
  • Swiss Made
  • 2 Years Warranty


Product Request


Subscribe to our newsletter


Industriestrasse 27
CH-8335 Hittnau

tel +41 (0)44 953 1010
fax +41 (0)44 953 1019


Brunner Elektronik AG uses cookies to ensure the best possible service. If you want to continue surfing on the website, you consent to the cookie usage policy.