CLS-P MK II Cyclic

Your choice for Helicopter or Fixed-Wing up to FFS Level D.



The BRUNNER CLS-P Active Force Feedback Cyclic meets the highest demands of professional flight simulation.

As a top level element of our Control Loading System portfolio of leading drop-in devices, the CLS-P MK II Cyclic integrates perfectly into many new or existing FNPT I as well as in FNPT II MCC or even FFS Level D Helicopter or Fixed-Wing cockpit environments. Supporting standard procedure training as well as abnormal and emergency procedure training, the BRUNNER CLS-P MK II Cyclic provides excellent quality, highest fidelity and unique durability at an unmatched price-performance level. The integrated high resolution load cell and the high dynamic brushless AC Servo technology reacts with realistic movements to even finest inputs and offers excellent artificial feeling for highest demands!

Our CLS-P MK II Cyclic is supporting single as well as dual pilot applications. A unique real-time  synchronization logic enables unmatched and automatic pilot/co-pilot take-over functionality for MCC applications.

The optionally available BRUNNER Grip, or a customized wired-trough Grip, can be easily mounted and replaced during operation for fast adoption to your training scenarios. Enabled by our CLS2Sim software-environment, the CLS-P MK II Cyclic communicates easily with commercially available
simulation software such as X-Plane, M-FSX, and Prepar3D®. Any third party flight simulation  connects via a simple TCP/IP or UDP remote interface protocol.



Peak ForcePitch: 100 Nm / 74 lb-ft
Roll: 100 Nm / 74 lb-ft
TravelPitch: Software +- 17.5° / Mechanically +- 20°
Roll: Software +- 17.5° / Mechanically +- 20°
Stick and Gripoptionally: BRUNNER Stick and Grip
Interface (Com)CAN (RJ45), USB (USB-2 Type-B)
Ethernet via optional
Ethernet2CAN gateway
Interface (I/O)wire through I/O connection with top - and bottom side connector (D-Sub37)
Power500 W peak (no fan)
Operating Voltage90-255 VAC 50/60 Hz (IEC5)
Size380 x 330 x 254 mm
14.9 x 13 x 10 in
Weight16.4kg / 36lbs


  • BRUNNER Drop-In fully integrated with power supply and control unit, no additional auxiliary devices required
  • Integrated Load Cell for highest fidelity and most realistic flight experience
  • Simulated effects: engine, ground, turbulence, force trim release, autopilot, stall, etc.
  • Aircraft and type-specific profiles
  • Dynamic pressure dependent force profile
  • BRUNNER real-time synchronization logic for dual-pilot cockpit with automatic pilot/co-pilot take-over (MCC)
  • Designed for standard, abnormal and emergency procedure training
  • Plug & Play (CAN or USB), optional Ethernet via BRUNNER high-speed Ethernet2CAN gateway
  • Plug & Play (CAN or USB), optional Ethernet via BRUNNER high-speed Ethernet2CAN gateway
  • Reliable, smooth, backlash and maintenance free design
  • Contactless high-resolution position feedback
  • No fan, very quiet, high efficient
  • Direct support for X-Plane, FSX, FSX Steam edition, Prepare-3D with BRUNNER CLS2SIM SW, X-Plane plugin for Windows, Linux
  • Fully external control for QTG testing, applied over a simple network protocol
  • Unlimited CLS2Sim license for single cockpit application
  • Safety integrated, Safe Torque Off (STO)
  • Swiss Made
  • 2 Years Warranty

 Forum for CLS2Sim, CLS-E Yokes and Rudder



– Operating system: Windows XP/7/8/10 needed for simulation interface software CLS2Sim

– Attention! Running X-plane (10/11) on a Linux operating system requires a separate windows installation (virtual machine or separate computer) for running CLS2sim software.


    Product Request

    ** We only save and process you contact data on behalf of contact and initial business contact. We will never give your data to third parties. You can always disagree to the storage of your contact data via e-mail to We will immediately delete your stored contact data as far as there are no legal terms of legal storage to be complied to. For further information regarding security of your data, please read our Data Privay Policy.